WARNINGS
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND FOLLOW THESE INSTRUCTIONS IN CASE OF DANGER
• Special cases when using outdoor air blower installations (with shielding), to avoid electric shock or other accidents. For each of the following situations, do not repair on your own, please contact the TOHIN technical team, or take the blower to an authorized service center, or remove the blower.
• To prevent rainwater and to ensure safety, always use a cover box on the air blower in case of outdoor installation.
• Carefully inspect the air blower after installation. It should not be plugged in if there is water on the waterproof parts.
• Air blowers should not be operated if the power cord or plug is damaged, if the blower is damaged, dropped or damaged under any circumstances.
• To prevent wetting of plugs, electrical circuit breakers and electrical outlets should have waterproof coverings. Always install the enclosure for the terminal those parts that provide power to the motor.
- Avoid water dripping into an outlet or plug.
- The wires connecting the electrical outlet to the air blower should be arranged in a circular coil and do not place anything on the wires.
- If the power plug or outlet gets wet, never unplug: Disconnect the fuse or circuit breaker that supplies power to the air blower. Then remove and check for the appearance of water present in the electrical outlet. Clean and dry before continuing use.
• Do not use air blowers near volatile liquids such as gasoline, diluents, etc. Because this can cause an explosion.
• Do not place anything near the blower (more than 0.5m away from the surroundings).
WARNINGS FOR USE
• When air blowers are used next to or near children, ensure that there is a cover box or belt cover there or install separate rooms for appliances.
• Air blowers are only used to pump air. Do not attempt to pump water or other liquids under any circumstances.
• Always turn off the engine when replacing belts. (belt)
• Ensure that the power supply is turned off when installing or removing the outer cover.
• Operating temperatures for blowers range between 41°F (5°C) and 104°F (40°C).
• Do not block the output of air. The air blower must have room for proper heat dissipation. Operation of air blowers at temperatures outside the recommended temperature range may cause malfunctions or shorten product life cycle times.
• Always unplug, turn off the CB before performing service, grasp the plug to remove the cord from the electrical outlet.
• Do not remove by pulling the power cord.
• Do not use devices without ensuring safety.
• Ensure the air blower is mounted securely before operation.
• Read and observe all vital signs on air blowers.
• Ensure that the wire extension (if required) is correct or higher (amperage or capacity). Make sure the power cord is in place to avoid tripping.
• In case either machine stops abnormally, sounds abnormally or vibrations abnormally, turn off the power and call a qualified professional (maintenance provider) to check
